![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Plastic strapping combines the toughness of the strip with the flexibility of the plastic strip. Normally, cracking does not occur under normal production and use conditions. However, the actual packaging process often encounters such a situation: The effect of plastic strip welding is very good. Good, however, the breakage and bulking occurred during the forklift truck's transportation. If the ratio of cracking and bulking is high, not only the time for transport delays, but also the cost and labor cost of secondary packaging cannot be discounted. Richang summed up more than 10 years of professional packaging experience, summed up the general reasons for PET plastic strapping cracking is as follows;
1. Impurities in the production of steel strips: As we all know, 100% steel strips produced from pure petrol pellets are absolutely free from cracking, and they can be used in harsh weather conditions, but pure PET The cost of plastic strapping is higher, and it is generally rare for companies to purchase such straps, so the pure steel strapping on the market is also relatively rare.
2, no added flexible agent: the market met more PET plastic steel strip is the use of bottles and other recyclable materials processed, so that the raw materials must be strictly controlled, screening of impurities, iron wire, etc., but also must add appropriate The proportion of flexible agent will ensure that the tape is not cracked.
3, raw materials are not dried: If the bottle and other raw materials are no problem, but also added a flexible agent, or the case of cracking, then we must check whether the raw materials are dried, drying temperature and time need to control.
4, the proportion of pure material is not suitable: in the production of plastic steel belt, the best bottle tablets also need to add a certain percentage of pure material, in order to ensure that the product produced by the toughness, as to the specific ratio, according to the usual experience and Specific products come in different proportions.
5, too much additives: Some manufacturers in order to pack the tape in the cold weather can also be used normally, you can add more additives, so there will be cracking.
6, the weather causes: poor quality of the plastic belt temperature adaptation range is also smaller, in the lower temperature conditions, the package will appear cracking.
7, baler failure: Baler tightening force is not set well or the welding effect is not good, there will be plastic belt cracking, cracking the belt due to only part of the load-bearing, easily lead to bulk bag.
Richang has always strictly controlled the production of its products. Regardless of the raw materials and processing technologies, we consider the customer's point of view. The production of steel strips is not only in the cold Xinjiang, but also in the aluminum ingot production workshops with higher temperatures. Packing belts can meet the needs of customers. And we solemnly promise: When cracks and quality problems occur in the plastic strip, we are all unconditionally replaced!
More packaged tape market in China to pack the transaction network.
YKK AUTHORIZED DISTRIBUTOR , https://www.ykkzipperdw.com